• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    济南玻璃门的安装注意细节
    来源:http://www.jnjqjc.com   时间:2016-4-26 10:53:03
    济南玻璃门的安装注意细节
    Jinan glass door installation of attention to detail
    1、油灰与玻璃及裁口接触的边缘应齐平,钉子、钢丝卡不得露出油灰表面;
    1, putty and the edge of the glass and the cutting mouth contact should be flush, nails, steel wire shall not reveal putty surface;
    2、安装好的玻璃应平整、牢固,不得有松动现象;
    2, installed glass should level off, firm, can not have loose phenomenon;
    3、木压条接触玻璃处,应与裁口边缘齐平。木压条应互相紧密连接,并与裁口紧贴;
    3, wood and glass bead contact place, should be flush with the cutting edges. Wooden battens should be closely connected to each other, and the cutting mouth against;
    4、油灰与玻璃及裁口应粘贴牢固,四角成八字形,表面不得有裂缝、麻面和皱皮;
    4, putty and glass and mouth should be stickup and firm, cutting corners into eight, the surface shall not have cracks, pits and wrinkled skin.
    5、密封条与玻璃、玻璃槽口的接触应紧密、平整,并不得露在玻璃槽口外面;用橡胶垫镶嵌玻璃,橡胶垫应与裁口、玻璃及压条紧贴,并不得露在任条外面;密封胶与玻璃、玻璃槽口的边缘应粘结牢固,接缝齐平。
    Article 5, sealing and slit should contact closely, flat glass, glass, and shall not be dew on the outside of the glass groove; With a rubber mat Mosaic glass, rubber mat should be with the mouth, glass cutting and layering clingy, and shall not be dew article sitting outside; Sealant with the edge of the glass, glass slot should be bonded firmly, flush joint.