• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    玻璃门拉手怎么安装
    来源:http://www.jnjqjc.com   时间:2016-9-7 10:32:54
    玻璃门拉手现在使用量越来越多,一定要注意其安装步骤。
      Glass door handle is now used more and more, be sure to pay attention to its installation steps.
      首先把玻璃门平放,在预先要安装拉手的地方做好记号,用电转装上对应规格的金刚砖头兑水打眼,此时得注意防护,以免玻璃破裂。如果不是钢化玻璃的话,就用10mm的玻璃钻头,量出拉手的孔距中心到中心,在玻璃上标记好,浇水打孔。
      The glass door is flat, well in advance to mark for installing the handle in place, electricity with corresponding specifications of the diamond bricks against water drilling, this time must pay attention to the protection, so as to avoid the broken glass. If it is not tempered glass, then use the 10mm glass drill, the amount of the handle from the center to the center of the hole in the glass, mark the good, watering hole.
      接着在拉手插入玻璃的部分涂少许玻璃胶。拉手组装时,其根部与玻璃靠紧密后再按紧固定螺钉,以保证拉手没有松动现象。
      Then insert a little glass in the handle into the glass. When the handle is assembled, the root of the handle is tightly pressed by the glass, and then press the fastening screw to ensure that the handle is not loose.
      后安装拉手时先从外面上,在里面拧拉手的长螺丝,别把拉手的螺丝留外面了,那样能够从外面把拉手卸掉的。
      Finally installed in the handle from the outside, the long screw in the inside of the screw, do not handle the screw left outside, so that can be removed from the outside handle.
      一定要注意其安装步骤,保证期使用过程中的相关事项。
      Be sure to pay attention to the installation steps to ensure that the use of the relevant issues during the period.