• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    玻璃门安装工序你知道几点呢
    来源:http://www.jnjqjc.com   时间:2016-10-8 15:50:33
    玻璃门安装工序你知道几点呢?下面小编为您介绍一下:
    Glass door installation process, you know what? Below small make up for you to introduce:
    1. 施工工序
    1 construction procedure
    定位、放线→安装框顶部限位槽→安装金属饰面的木底托→安装竖向门框→安装玻璃→安装玻璃门扇上下门夹→门扇定位安装→安装玻璃门拉手。
    Positioning, line, installation box at the top of the limiting groove, the installation of metal decorative wood base, installation of vertical frames, glass installation, installation of glass door gate, door installation, installation positioning clamp glass door handle
    2. 施工方法与技术措施
    2 construction methods and technical measures
    (1) 定位、放线:由固定玻璃和活动玻璃门扇组合在的玻璃门,统一进行放线定位。根据设计和施工图纸的要求,放出玻璃门的定位线,并确定门框位置,准确地测量地面标高和门框顶部标高以及中横框标高。
    (1) positioning, line: by the fixed glass and glass door activity combination in the glass door, unified line positioning. According to the requirements of design and construction drawings, the positioning line of the glass door is released, and the position of the door frame is determined, and the elevation of the ground and the top of the door frame are accurately measured.
    (2) 安装框顶部限位槽:限位槽的宽应大于玻璃厚度2-4mm,槽深为10-20mm。安装时,先由所弹中凡线引出两条金属装饰板边线,然后按边线进行门框顶部限位槽的安装。通过胶合垫板调整槽口内的槽深。限位槽除木衬外,采用1.5mm钢板压制、钢板焊制及铝金属型材等衬里外包不锈钢等制成。
    (2) the top position of the installation box: the width of the limit groove should be larger than the glass thickness 2-4mm, and the groove depth is 10-20mm. When installed, the play where the line out of two metal decorative plate line, and then press the edge of the top of the door frame limiting groove installation. Through the bonding plate adjustment notch groove depth. In addition to the wooden lining, the limiting groove is made of 1.5mm steel plate, steel plate welding, aluminum metal section and other lining made of stainless steel.
    我们始终保持不断的开拓创新,尽大的可能真诚的为广大客户提供高品质的产品、贴心的服务。达到与客户共赢的目标。
    We have always maintained a constant development and innovation, to do our best to provide customers with high quality and high quality products, the most intimate service. Achieve the goal of win-win with customers.