• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    讲解一下卷帘门的安装工艺
    来源:http://www.jnjqjc.com   时间:2016-12-29 14:53:17
    讲解一下卷帘门的安装工艺,快来看一下:
    Explain the installation process of rolling shutter door, look at:
    1、先在需要安装的门框框口位置画出线。表明尺寸大小,然后找工作人员设计出合适的电动卷帘门,这里值得注意的一点是框内高度比门扇的高度要高一点点。
    1, the first need to install the door frame mouth position drawing line. Show the size, and then find the staff to design the proper electric shutter doors, one thing to note here is the box height than the height of the doors to a little higher.
    2、先把卷帘门的门框固定,这里要先拆掉门框下部的固定板。(注意:洞口两侧地面要预留凹槽,经校正合格后,固定木楔,门框铁脚与预埋铁板件焊牢。用水泥砂浆或强度不低于10MPa 细石混凝土嵌塞牢固即可。)
    2, the first rolling shutter door frame fixed, here to remove the bottom of the door of the fixed plate. (Note: the hole on both sides of the ground to reserved grooves, corrected after passing the fixed frame of wood, iron feet and embedded iron parts welding. The use of cement mortar or strength of not less than 10MPa fine stone concrete impaction can be firmly. )
    3、安装卷帘门扇主体门扇。一定要保证电动卷帘门与墙体结成整体,封闭性要做好,再粉刷洞口及墙体。粉刷完毕后,门缝应均匀平整,开启电动卷帘门应该自由轻便,不得有过紧、过松和反弹现象。
    3, the installation of the rolling door body door. It is necessary to ensure that the electric rolling doors and walls to form a whole, closed to do a good job, and then painted the hole and wall. After the completion of the painting, the door should be smooth, open the electric shutter doors should be free of light, not too tight, too loose and rebound phenomenon.
    我们一直来都争取为客户提供更完美的服务,有广大客户的信任与支持,我们才会做得更好,走的更远,为客户们送去理想的产品,期待与您携手共创美好未来!
    We always strive to provide more perfect service for customers, have the trust and support of our customers, we will do better, go farther, for customers to send the ideal products, look forward to working with you to create a better future!