• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    讲解一下济南玻璃门固定的技巧知识
    来源:http://www.jnjqjc.com   时间:2017-1-6 10:33:04

    济南玻璃门一般都是很大很重,安装玻璃门的时候都是比较笨重的,但是玻璃门固定也是有技巧的,这样更方便我们的安装,玻璃门也更加的牢固。

    Ji'nan glass doors are generally very large and heavy, the installation of the glass door is relatively heavy, but the glass door is also fixed skills, so that we are more convenient installation, the glass door is more secure. 

          济南玻璃门维修首先要做的就是用玻璃吸盘器把裁切好、倒好角的玻璃吸紧,然后手握吸盘器把玻璃板抬起,插入门框顶部的限位槽内后放到底托上,并调整好安装位置,使玻璃板边部正好盖住门框立柱的不锈钢或其它饰面的对口缝,接着在木底托上钉另一侧木条,把玻璃板固定在木底托上。在木条上涂刷万能胶,将该侧不锈钢饰面或其它饰面粘卡在木方上。
    The first Ji'nan glass door maintenance to do is to use glass sucker to cut back, corner of the glass ceiling tight, then holding a sucker to the glass plate is lifted, a limiting groove is inserted into the door frame at the top of the post on the bottom support, and adjust the installation position of the glass plate edge covers stainless steel frame column or other decorative counterparts on the other side seam, then nail in the wood wood base, the glass plate is fixed on the wood base. Paint on wood adhesive, the side of stainless steel or other decorative veneer sticking in the wood on the side.
    然后是在门框顶部限位槽处和底托固定处、玻璃板与门框立柱接缝处注入密封胶。注胶时紧握注射枪压柄的手用力要均匀,从缝隙的端头开始,顺着缝隙均匀缓缓移动,使密封胶在缝隙处形成一条表面均匀的直线,后用塑料片刮去多余的密封胶,并用干净抹布擦去胶痕。
    Then, at the top of the door frame, the sealing groove, the bottom support fixing part, the glass plate and the door frame column joint are filled with sealant. When the glue gun handle hand hold pressure force should be uniform, starting from the end of the gap, the gap along the uniform moving slowly, the sealant to form a uniform surface line at the gap, at last with a plastic film to scrape off the excess sealant, and glue mark with clean dishcloth.
    后固定玻璃板必须用两块或多块来对接,济南玻璃门维修师傅对接时对接缝应留2-3mm 的距离,玻璃的边必须倒角,对接的玻璃定位并固定后,用注射枪将密封胶注入缝隙中,注满后用塑料片在玻璃两侧刮平密封胶,用干净布擦去胶迹。
    At the end of the fixed glass plate must be butt with two or more, Ji'nan glass door repair master docking on the joint should be left to the distance of 2-3mm, the glass edges must be chamfered, positioning and fixing the glass butt after injection gun sealant into the gap, is filled with a plastic film on glass sides scraping sealant with a clean cloth to wipe glue.
    我公司致力于为用户提供值得信赖的优良产品。我们期待与您建立长期的战略合作关系,为您提供优良的质量和完善的服务体系。
    Our company is committed to providing users with reliable products. We look forward to working with you to establish long-term strategic cooperative relations, to provide you with excellent quality and perfect service system.