• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    家庭使用卷帘门如何选择?
    来源:http://www.jnjqjc.com   时间:2017-7-7 18:02:27
    无论济南卷帘门是在家庭还是在一些建筑当中,现在的卷帘门市场当中,安装卷帘门有平开式、推拉式、折叠式、栅栏式等结构形式,在这些的样式当中,家庭主要用平开式。所以需要选购时重点考察其防盗性能和质量的因素:

    Whether Ji'nan doors at home or in some buildings, now the shutter door market, install doors have flat opening push-pull, folding, fence type structure, in the style of the family, mainly with flat open. Therefore, the need to buy, focusing on its anti-theft performance and quality factors:

    济南卷帘门

    1、安全等级电动卷帘门安全分为A、B、C3级。C级防盗性能高,B级其次,A级低,市面上多为A级,普遍适用于一般家庭。A级要求:全钢质、平开全封闭式,普通机械手工工具与便携式电动工具相互配合作用下,其薄弱环节能够抵抗非正常开启的净时间。
    1, safety grade electric shutter door safety is divided into A, B, C3 level. C grade anti-theft highest performance, B level, followed by a class a minimum, the market is mostly A-level, generally applicable to the general family. Class a requirements: all steel, flat open, fully enclosed, common mechanical hand tools and portable power tools with each other, the weakest link can resist abnormal open time.
    2、目前较普遍用不锈钢,美观、耐用、防锈蚀。主要看两点:牌号现流行的不锈钢电动卷帘门材质以牌号302、304为主;钢板厚度门框钢板厚度不小于2cm,门扇前后面钢板厚度一般在0.8cm~1cm之间,门扇内部设有骨架和加强板。
    2. Stainless steel is more popular at present. It is beautiful, durable and rustproof. Main point: stainless steel electric rolling door material grades are popular in grades 302 and 304; the thickness of the steel plate door plate thickness not less than 2cm, the former general door behind the thickness of the steel plate in 0.8cm ~ 1cm, the doors with internal frame and a reinforced plate.
    3、锁具合格的电动卷帘门一般采用三方位锁具或五方位锁具,不仅门锁锁定,上下横杆都可插入锁定,对门加以固定。大多数门在门框上还嵌有橡胶密封条,关闭门时不会发出刺耳的金属碰撞声。
    3, locks qualified electric rolling doors generally use three directions locks or five directions locks, not only locks locked, the upper and lower rail can be inserted locking, fixed to the door. Most doors are fitted with rubber seals on the door frame, and they do not cause piercing metal bumps when closing the door.
    4、工艺质量注意看有无开焊、未焊、漏焊等缺陷,看门扇与门框配合等所有接头是否密实,间隙是否均匀一致,开启是否灵活,油漆电镀是否均匀牢固、光滑等。
    4, pay attention to see whether the process quality of welding, welding, weld defects such as, see doors and doorcase cooperate with all the joints is dense, the gap is uniform, the opening is flexible, paint electroplating is uniform firm, smooth etc/
    您如果对我们的产品感兴趣或者有任何的疑问,您可以直接给我们留言或直接与我们联络,我们将在收到您的信息后,会时间及时与您联络。
    If you are interested in our products or have any questions, you can either leave us a message or contact us directly. We will contact you in the first time after receiving your information.