• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    玻璃门的安装方法包括?
    来源:http://www.jnjqjc.com   时间:2017-11-14 16:43:33
    玻璃门是我们日常生活中非常常见的门具,济南玻璃门的制作材料不同,色彩各异,光泽感观效果好,富有极佳的装饰效果,同时具有耐腐蚀,易清洗,抗冲刷等特点。那么你知道济南玻璃门安装有什么安装要点和注意事项吗?

    Glass door is a very common door in our daily life. Ji'nan glass door is made of different materials, different colors, shiny sense of good effect, excellent decorative effect, and has the characteristics of corrosion resistance, easy cleaning, erosion resistance and so on. Well, you know what the installation of Ji'nan glass door installation points and matters needing attention?

    济南玻璃门

    1、 定位、放线由固定玻璃和活动玻璃门扇组合玻璃门,统一进行放线定位,依据设计和施工图纸要求,放出玻璃门的定位线,同时确定门框位置。
    1. The positioning and setting line is made up of fixed glass and movable glass leaf door, and the position of the door is released according to the requirements of the design and construction drawing.
    2、 安装框顶部限位槽限位槽的宽应大于玻璃厚度二至四毫米,槽深为十至二十毫米。安装时,一开始由所弹中凡线引出两条金属装饰板边线,接着按边线进行门框顶部限位槽的安装,通过胶合垫板调整槽口内的槽深。
    2. The width of the limiting slot at the top of the mounting frame should be greater than the glass thickness of two to four mm, and the groove depth is ten to twenty mm. At the beginning of the installation, the two metal decorative plate side lines are drawn from the inside line of the shell, and then the installation of the limit slot on the top of the doorframe is carried out by the side line, and the groove depth in the notch is adjusted by gluing the backing plate.
    3、 安装金属饰面的木底托把方木固定在地面上,用万能胶把金属饰面板粘在木上。若采用铝合金方管,可以用铝角固定在框柱上,或用木螺钉固定在埋入地面中的木砖上。
    3, the installation of metal decorative wood base the wood is fixed on the ground, with adhesive to metal panels bonded to the wood. If the Aluminum Alloy tube, can use aluminum angle is fixed on the frame column, or with wood screws fixed on the sunken in the grounds.
    4、 安装竖向门框接所弹中心线钉立门框方木,接着用胶合板确定门框柱的外形和位置,后外包金属装饰面。包饰面时要把饰面对头接缝位置放在安装玻璃的两侧中门位置。
    4, the installation of vertical frames the bomb line nail vertical door frame timbers, and then determine the shape and position of frame column with plywood, finally outsourcing metal decorative surface. The package finishes to finish butt joint position on the middle position installed on both sides of the glass.
    希望上述介绍对您有所帮助哦,我们以真诚贴近客户,以行动满足客户,以双赢保有客户,以个性引领客户,您的满意是我们大的追求。
    Hope that the above introduction to help you, oh, we sincerely close to customers, to meet the needs of customers, to win win customers, personality to lead customers, your satisfaction is our greatest pursuit.