• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    玻璃门门缝出现故障的解决方法
    来源:http://www.jnjqjc.com   时间:2017-12-12 15:16:22
    济南玻璃门碰到一起是地弹簧或者门夹的定位螺丝松动、移位造成,首先要确定你用的地弹簧、玻璃门夹是不是正品,如果是假冒劣质五金产品,再进行维修施工时更加需要注意安全,而且调整的力度要小,以免用力过猛使螺丝脱扣,得不偿失。

    Ji'nan glass door together is a spring or positioning door clamp screw loosening, displacement caused by, make sure you use the floor spring, glass door clip is not genuine, if it is fake and inferior hardware products, and then repair construction needs more Caution!, and adjust the intensity to be small, to avoid excessive force. Screw tripping, The loss outweighs the gain.

    济南玻璃门

    1、检查地弹簧里面,打开地弹簧安装于地表明的不锈钢盖板,这时就可以看到里面有很多螺丝顶紧地弹簧的盒体,看这些螺丝是否有松动。
    1, check the ground spring, the open spring is installed on the stainless steel cover, indicating that there are many screws on the top of the box to see if the screws are loose.
    2、是打开不锈钢门夹下夹得盖板,可以看到有几个内六角的螺丝固定门夹本体,看螺丝是否有松动。
    2, it is to open the stainless steel door clips to clip the cover plate, you can see a few inside the six corners of the screw fixed door clamp body to see whether the screw is loose.
    3、打开不锈钢门夹上夹扣板,同样检查内六角螺丝的牢固性。具体调节方法,如果是玻璃门上面交叉的地方相撞,可以将上夹往玻璃门中心方向移动,然后带紧螺丝或者将玻璃下夹往门两侧方向移动,或者将地弹簧本体往门扇中心方向移动,然后拧紧所有螺丝,实验门扇运行效果即可。
    3, open the stainless steel door clip clip plate, also check the firmness of the internal six angle screws. Specific adjustment method, if the glass is above the door where cross collision can be attached to the direction of the glass door with screws or mobile center, will be clamped at both sides of the door glass and then move, or will the spring to the door body center direction, and then tighten all the screws, can effect door operation.
    以上就是小编为您讲解的有关知识,我们拥有严谨的工作态度,熟练的工作技能,将确保任务准确、高效的完成。
    The above is the knowledge that Xiao Bian tells you. We have strict working attitude and skilled working skills. We will ensure that tasks are done accurately and efficiently.