• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    卷帘门的安装方法和步骤
    来源:http://www.jnjqjc.com   时间:2018-2-21 23:38:56
    1、先在需要安装的门框框口位置画出线。表明尺寸大小,然后找工作人员设计出合适的电动卷帘门,这里值得注意的一点是框内高度比门扇的高度要高一点点。
    1, first in the need to install the door frame position painting line. Show the size, and then find the staff to design the proper electric shutter doors, one thing to note here is the box height than the height of the doors to a little higher.

    2、先把电动卷帘门的门框固定,这里要先拆掉门框下部的固定板。注意:洞口两侧地面要预留凹槽,经校正合格后,固定木楔,门框铁脚与预埋铁板件焊牢。用水泥砂浆或强度不低于10MPa 细石混凝土嵌塞牢固即可。

    济南卷帘门配件

    2. First fix the door frame of the electric rolling shutter door. First, remove the fixed plate at the lower part of the doorframe. Note: the hole on both sides of the ground to reserved grooves, corrected after passing the fixed frame of wood, iron feet and embedded iron parts welding. The use of cement mortar or strength of not less than 10MPa fine stone concrete impaction can be firmly.
    3、安装电动卷帘门扇主体门扇。一定要保证电动卷帘门与墙体结成整体,封闭性要做好,再粉刷洞口及墙体。粉刷完毕后,门缝应均匀平整,开启电动卷帘门应该自由轻便,不得有过紧、过松和反弹现象。
    3. Install the main door leaf of the electric rolling shutter door. Must ensure that the electric rolling shutter doors and walls into a whole, closed to do a good job, and then paint the hole and wall. After painting, the door should be uniform and smooth, open the electric rolling shutter door should be free and light, not too tight, too loose and rebound phenomenon.
    感谢大家在百忙之中关注公司发布的产品信息,如果你想要了解更多,可以来我们公司咨询。我们欢迎大家的光临,并与你的合作!
    Thank you for your busy schedule to pay attention to the product information released by the company. If you want to know more, you can come to our company for consultation. We welcome your presence and cooperate with you!