• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    安装卷帘门时应注意些什么?
    来源:http://www.jnjqjc.com   时间:2018-5-11 15:14:30
    安装卷帘门注意:济南卷帘门侧板与墙要为90度主板固定在跨出洞口的13公分的垂直线上,副板固定在跨出洞口的9公分垂直线上。电机左右安装,可根据现场要求所定,但尺寸不得更改。
    Installation curtains door attention: the Ji'nan roll door side board and the wall should be fixed to the 13 - centimeter vertical line of the 90 - degree main board, which is fixed on the 9 - centimeter vertical line across the hole. The installation of the motor can be determined according to the requirements of the site, but the dimensions should not be changed.
    1、首先看手动链条是否向下,在将电机固定在主板上,在把链条固定在轮盘和电机底座齿轮连接在将遥控接线盒与电机连接,试下手柄是否颠倒,如颠倒遥控接收盒侧方有黑色按键,向另一方拨动助即可。

    1, first see whether the manual chain is down, the motor is fixed on the main board, the chain is fixed in the wheel plate and the motor base gear connection to connect the remote control junction box and the motor, try to reverse the handle, such as reversing the remote control reception box side to the black button, to the other side to help.

    济南卷帘门

    2、用尺子量主板和副板的外边看下尺寸是否正确,如正确把轴上在侧板上,注意要先把轴打一条水平线,再用10个钻头打孔50公分,再用14的镙母焊在轴上,记住要与轴上的孔垂直在焊,一定要焊牢固,再把帘子的片的中心与轴上的孔对齐用10个的钻头打孔一定要垂直。
    2. See if the size is correct with the outer edge of the main board and the side board. If the shaft is correctly placed on the side board, take a horizontal line on the axis, then 10 drill holes for 50 centimeters, then 14 of the mother on the shaft. Remember to weld the hole perpendicular to the shaft on the shaft, must be soldered, and then the center of the first piece of the curtain will be in the center. Aligning holes on the shaft with 10 drill holes must be vertical.
    3、在将卷帘门帘片穿好两侧用封头封好用拉铆钉拉住。
    3, wear the shutter curtain on both sides by sealing the head and pulling the rivet.
    4、封完后用绳翻过轴把帘子打个孔一头一个用绳拴住,别一端用人拽住,按下手柄的上升键,使轴运行将帘子带上去,镙丝杆把帘子和轴连在一起再把帘子升上去,一定要牢固。
    4, after the closure, the cord is pulled over the shaft to tie a hole to one head with a rope, and the other end is pulled by a man, and the rising key of the handle is pressed so that the shaft will be carried on the curtain.
    感谢大家在百忙之中关注公司发布的产品信息,如果你想要了解更多,可以来我们公司咨询。我们欢迎大家的光临,并与你的合作!
    Thank you for your busy schedule to pay attention to the product information released by the company. If you want to know more, you can come to our company for consultation. We welcome your presence and cooperate with you!