• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    卷帘门装置过程办法和详细步骤
    来源:http://www.jnjqjc.com   时间:2018-9-26 13:38:18
    卷帘门装置过程办法和详细步骤
    Rolling shutter device process method, rolling door device function picture
    卷帘门是现在许多大型商场或许门面所需求装置的一种门,缩短便利,而且节约空间。它是以多关节活动的门片一片片并联拼接而成。
    Rolling shutter door is now a kind of door that many large shopping malls or facades need to install, shorten convenience, and save space. It is made up of multiple joint movable doors and pieces in parallel.
    卷帘门装置过程一:做好预备工作
    Roller shutter device process 1: prepare for work
    1.资料:专用夹具.刮刀.粉线包.冲击电钻.手手电钻.电焊机.切割机.螺丝刀.锤子.线坠.水平尺等。
    1. Data: special fixture, scraper, powder wire package, percussive electric drill, manual electric drill, welding machine, cutting machine, screwdriver, hammer, wire drop, horizontal ruler, etc.
    2.东西:中柱.上罩.卷轴 .叶片.导轨。
    2. things: middle pillar, upper cover, reel, blade, guide rail.
    温馨提示:以上这些资料都是必备东西,相同不能少,要预备完全才好开工。
    Warm reminder: the above information is necessary, the same can not be less, to be fully prepared before the start of construction.
    卷帘门装置过程二:开端装置卷帘门
    Rolling door installation process two: start device shutter door
    1.断定要装置卷帘门的方位,并用线坠.水平尺等东西进行标示,找准水平线和垂直线。
    1. Determine the position of the rolling shutter door and mark it with a pendant, horizontal ruler, etc. to find the horizontal and vertical lines.
    2.根据定位的划线开端装置卷帘门的边框。
    2. according to the location of the scribing, start up the frame of the rolling door.
    3.根据卷门机的说明书所提示的办法过程以及注意事项进行卷帘门机的装置。
    3. According to the method and process mentioned in the instructions of the door rolling machine and the matters needing attention, the device of the door rolling machine is carried out.
    4.将拼装好的卷帘门体固定好,然后将限位器找准方位装上,并试着工作。
    4. fix the assembled rolling door body, then install the locator in the right direction and try to work.
    5.进行滑道.手动组织.包箱的装置。

    5. carry out the slideway. Manual organization.

    济南卷帘门

    卷帘门装置过程三:查验效果
    Rolling door installation process three: inspection results
    1.进行调试和工作,保证每项功用和设备工作无缺。
    1. debug and work to ensure that every function and equipment is working.
    2.全部装置并查看结束,卷帘门的装置就算完成了,接下来就可以正常使用了。
    2. All the devices and check the end of the rolling shutter, the device is completed, and then can be used properly.
    经验总结:
    Experience summary:
    1.铝合金的零部件外表要进行一系列的保护措施,可以在上面镀锌或许涂一些放氧化涂料,否则很简单被氧化。
    1. Aluminum alloy parts to carry out a series of protective measures, can be galvanized or coated with some oxide coating, otherwise it is very simple to be oxidized.
    2.卷帘门在拼装卷帘门的时候保证每个叶片咬合准确,否则会影响装置。
    2. when rolling up the shutter door, ensure that each blade is properly occluded, otherwise it will affect the device.
    3.在断定水平线和垂直线要做到精准少误差,而且在装置时要按照所划的尺度装置。
    3. In the determination of horizontal and vertical lines to be accurate and less error, and in the device according to the scale device.
    济南慧杭门业有限责任公司,对济南卷帘门感兴趣的朋友可以关注我们http://www.jnjqjc.com,敬请期待更多精彩内容。
    Jinan Huihang Door Industry Co., Ltd., interested in Jinan rolling shutter door friends can pay attention to our http://www.jnjqjc.com, please look forward to more exciting content.