• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    玻璃门关门速度调整技巧--济南玻璃门
    来源:http://www.jnjqjc.com   时间:2019-2-22 15:16:38
    玻璃门的关门速度如果过快的,就很容积造成玻璃门挤人的现象,很容易出现一些事故,如果关门速度过慢的话,又影响了玻璃门的使用体验,那么我们该怎么调节玻璃门的关门速度,使其保持在一个合理的范围内呢。下面由济南玻璃门厂家济南慧杭门业有限责任公司给大家介绍一下调整玻璃门关门速度的方法。
    If the closing speed of the glass door is too fast, it will be very voluminous, causing crowding phenomenon of the glass door. It is easy to cause some accidents. If the closing speed is too slow, it will affect the use experience of the glass door. Then how can we adjust the closing speed of the glass door to keep it in a reasonable range? Next, Jinan Huihang Door Industry Co., Ltd., a glass door manufacturer in Jinan, will introduce to you the method of adjusting the closing speed of glass doors.
    想要调节玻璃门的关门速度,你可以把地弹簧上面的不锈钢面板的螺丝拧开,看地弹簧是不是有两个螺丝调节的孔(一般是一字头螺丝调节)。有些是只有一个调节螺丝。首先你把两个螺丝都拧紧,然后打开门,看门是不是停住,然后慢慢试着调节其中一个,如果关门速度快了,那么这个调节螺丝就是控制关门角度是70-30左右,通常我们称为1速调节。如果调节螺丝是控制门关到30-0度的,那么这个就是2速。经过慢慢的调节尝试,选择一个令自己满意的玻璃门关门速度就可以了。

    To adjust the closing speed of glass doors, you can unscrew the stainless steel panel screw on the floor spring to see if the floor spring has two screw-adjusted holes (usually one-screw adjustment). Some have only one adjusting screw. First you tighten the two screws, then open the door and see if the door stops. Then slowly try to adjust one of them. If the closing speed is fast, then the adjusting screw is to control the closing angle of about 70-30, commonly known as 1-speed adjustment. If the adjusting screw is to control the door to close to 30-0 degrees, then this is 2 speed. After a slow adjustment attempt, you can choose a glass door closing speed that you are satisfied with.

    济南玻璃门

    看了上面济南玻璃门厂家的介绍,小伙伴是不是已经跃跃欲试了呢?如果您还有任何关于玻璃门的问题,都可以到我们的官网:http://www.jnjqjc.com给我们留言,谢谢您的支持。
    Looking at the introduction of the glass door manufacturer in Jinan above, is the little partner eager to try? If you have any questions about glass doors, you can leave a message on our website. Thank you for your support.