• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    济南玻璃门的安装注意事项
    来源:http://www.jnjqjc.com   时间:2019-3-20 17:25:16
    玻璃门由玻璃制成,但与其他玻璃制品相比,济南玻璃门的强度,厚度和硬度相对较高,具有普通实木门的功用。由于玻璃门的主体是透明的,因而在隔开的空间中可视地共享空间,这特别适用于小型家居装饰空间。那么小编今天要谈的是分享家居装饰玻璃门装置的经历和留意事项。我们一同来看看吧。
    The glass door is made of glass, but compared with other glass products, the strength, thickness and hardness of Jinan glass door are relatively high, and it has the function of ordinary solid wood door. Because the main body of the glass door is transparent, it can share space visibly in the separated space, which is especially suitable for small home decoration space. So what Xiaobian wants to talk about today is to share the experience and precautions of home decoration glass door device. Let's have a look together.
    一切都需求准备,玻璃门的装置也不例外。在装置玻璃门前,需求确保房屋内的空中施工已完成,并且完成其他装饰,如门的侧门和门。此时应留意为玻璃门安装预留一定厚度的凹槽。门侧四个方向的倒角必需用砂块和其他工具研磨,以到达光滑效果并避免边缘坍塌。装饰不锈钢门框的木质底座需求用相应的专用工具固定在空中上,然后用万能胶将不锈钢粘贴在木质面上,以确保结实。
    Everything needs preparation, and the glass door is no exception. Before installing glass doors, it is necessary to ensure that air construction in the house is completed and other decorations, such as side doors and doors, are completed. At this time, attention should be paid to reserve a certain thickness of grooves for the installation of glass doors. The chamfers in the four directions of the door side must be ground with sand and other tools to achieve smooth effect and avoid edge collapse. The wooden base for decorating stainless steel door frames needs to be fixed in the air with corresponding special tools, and then stainless steel is pasted on the wooden surface with universal glue to ensure its firmness.

    在玻璃门装置施工过程中,必需强调需求专业的装置办法,并依照玻璃门装置图的请求来停止。首先,应该用高压玻璃吸盘拧紧玻璃,然后用手握住吸盘将玻璃抬起。此时,需求留意的是,用作玻璃门的厚玻璃装饰资料常常很重,一个人抬不起来,需求三个或三个以上的人一同操作,笨重处置。抬起玻璃后,将其固定在门框顶部预留的槽中,然后将底部迟缓放在底部支架上,并对应玻璃四周设备的方向,使玻璃的四个边和门框互相贴合。

    济南玻璃门

    In the construction process of glass door installation, it is necessary to emphasize the need for professional installation methods and stop according to the requirements of glass door installation drawings. First, the glass should be tightened with a high-pressure glass sucker, and then the glass should be lifted by holding the sucker in your hand. At this time, the need to note that the thick glass decoration materials used as glass doors are often very heavy, one person can not lift, three or more people need to operate together, heavy disposal. After lifting the glass, fix it in the slot reserved at the top of the door frame, then place the bottom slowly on the bottom bracket, and correspond to the direction of the equipment around the glass, so that the four sides of the glass and the door frame fit each other.
    玻璃门的装置有很多留意事项,如上胶密封的操作办法。首先,我们需求将玻璃胶装置在相应的注射枪。在设置相应的操作之后,握住注射枪体的另一只手握住注射胶手柄,从而能够挤出少量的玻璃胶并且能够指向相应的镶嵌玻璃门间隙。在注射中,我们需求控制适宜的量,不要太多,也不要太少。
    There are many precautions for the installation of glass doors, such as the operation method of sealing with glue. First of all, we need to install the glass glue device in the corresponding injection gun. After setting the corresponding operation, the other hand of the injection gun body is grasped by the injection glue handle, so that a small amount of glass glue can be extruded and pointed to the corresponding interstice of the inlaid glass door. In injection, we need to control the appropriate amount, not too much, not too little.
    以上的内容由济南玻璃门友情提供,希望对您有所帮助。更多的精彩内容请收藏我们的官网:http://www.jnjqjc.com谢谢支持。
    The above content is provided by Jinan Glass Gate Friendship. I hope it will be helpful to you. For more wonderful content, please collect our official website: http://www.jnjqjc.com. Thank you for your support.