• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    自动感应门的使用注意事项
    来源:http://www.jnjqjc.com   时间:2019-4-10 15:48:49
    当有物体靠近门时,门完成了自动开启及关闭,我们称这种门的称号为自动感应门。这种自动感应门如今普遍应用于办公楼、厂房、超市、机场等场所。下面我们就以济南卷帘门厂家的自动感应门为例,给大家解说一下感应门的运用留意事项。
    When an object is near the door, the door opens and closes automatically. We call this kind of door the automatic induction door. This kind of automatic induction door is now widely used in office buildings, factory buildings, supermarkets, airports and other places. Next, we will take the automatic induction door manufacturer of Jinan rolling shutter as an example to explain the application of induction door.
    感应探测器探测到有人进入时,感应探测器将搜集信号,生成脉冲信号,其后脉冲信号传给主控器,主控器判别后通知马达运转,同时监控马达转数,以便通知马达在一定时分加力和进入慢行运转。马达得到一定运转电流后做正向运转,将动力传给同步带,再由同步带将动力传给吊具系统使门扇开启;门扇开启后由控制器作出判别,如需关门,通知马达作反向运动,关闭门扇。
    When the induction detector detects someone entering, the induction detector collects the signal and generates the pulse signal. Then the pulse signal is transmitted to the main controller. After the main controller distinguishes, it notifies the motor to run. At the same time, it monitors the speed of the motor, so as to inform the motor to add force at a certain time and enter slow running. When the motor gets a certain running current, it runs forward, transfers power to the synchronous belt, and then transfers power to the hanger system by the synchronous belt to make the door fan open. After the door fan opens, the controller makes the judgment, if it needs to close the door, informs the motor to move backwards, and closes the door fan.

    清洁机箱内部的油污、灰尘 检查自动感应门各部件的磨损状况,轨道和滑轮不能注油检查自动门的支位偏向及螺丝松紧状况 检查皮带的松紧状况 检查控制器对电机输出、开关门宽度、速度、制动等状况 检查电压参数能否正常 维修、改换损坏的部件 业主还需注重自动门的定期颐养与维护,自动门由于受装置质量及运用环境的影响,运用过程中难免会发作问题。假如长期缺乏颐养,招致自动门存在的隐患及小毛病得不到及时处置,将会由小毛病变成大毛病,终可能招致自动门的瘫痪,还有无框自动感应门公司在施工后请求甲方在运用过程中尽量在门上贴上标示,避免人不留意碰到,形成人身伤害。

    自动感应门

    Clean the oil and dust inside the chassis to check the wear condition of the components of the automatic induction door. The track and pulley can't inject oil to check the support deviation of the automatic door and the screw tightness to check the belt tightness. The controller checks the output of the motor, the width, speed and braking of the switch door to check whether the voltage parameters can be maintained normally and the owners of the damaged parts need to pay attention to it. Regular maintenance of automatic doors, automatic doors due to the quality of the device and the impact of the operating environment, the use of the process will inevitably occur problems. If long-term lack of self-care, the hidden dangers and minor faults of automatic doors can not be dealt with in time, they will be changed from minor faults to major faults, which may eventually lead to the paralysis of automatic doors. There are also frameless automatic induction doors company requesting Party A to put labels on the doors as far as possible in the course of construction, so as to avoid personal injury.
    本文由济南卷帘门厂家进行编写,想要了解更多的产品及更详细的精彩内容,请关注我们的官方网站:http://www.jnjqjc.com您的惠顾是对我们很大的支持。
    This article is written by Jinan curtain door manufacturer. If you want to know more products and more detailed wonderful content, please pay attention to our official website: http://www.jnjqjc.com. Your patronage is a great support to us.