• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    铝合金卷帘门安装步骤详解
    来源:http://www.jnjqjc.com   时间:2019-4-12 18:49:54
    铝合金卷帘门很常见,大家对它也都很熟悉。铝合金卷帘门不仅型号齐全,能够满足人们不同的要求,而且优点也非常多,除了安全、耐用以外,占用空间小、灵活轻便、维护简单等都是它的优点,因此,在大型厂房、超市、车库等场所,人们都喜欢选用铝合金卷帘门,下面,我们一起来了解怎样安装铝合金卷帘门。
    Aluminum alloy rolling curtain doors are very common, and everyone is familiar with them. Aluminum alloy rolling curtain doors not only have complete models and can meet people's different requirements, but also have many advantages. In addition to safety and durability, they have the advantages of small occupancy space, flexibility and portability, and simple maintenance. Therefore, in large factories, supermarkets, garages and other places, people like to choose aluminium alloy rolling curtain doors. Here, let's learn how to install aluminium alloy rolling curtain doors. Rolling shutter door.
    1、核对洞口和卷帘门的规格
    1. Check the specifications of orifices and rolling shutters
    这一项是正式安装的准备工作,首先要确定洞口位置,核对洞口位置的准确性,确保洞口上面留足能够容纳卷帘门体的空间,其次,核对卷帘门的型号是不是正确,是不是与洞口规格相一致。
    This is the preparatory work for the formal installation. First of all, the location of the entrance should be determined, and the accuracy of the location of the entrance should be checked to ensure that there is enough space on the entrance to accommodate the curtain door body. Secondly, the model of the curtain door should be checked to be correct and consistent with the specifications of the entrance.
    2、安装导轨
    2. Installation of guideways
    首先,检查导轨型号是否正确,接着,在洞口处定位、划线、钻孔,然后将导轨固定好,两条导轨的安装方法是相同的,但要注意保证它们在同一水平线上。

    First, check whether the model of the guide is correct. Then, locate, line and drill holes at the entrance of the tunnel. Then fix the guide well. The installation methods of the two guideways are the same, but attention should be paid to ensuring that they are on the same horizontal line.

    济南卷帘门

    3、安装左右支架
    3. Installation of left and right brackets
    核对门洞尺寸,并以此为依据确定支架的具体安装位置,接着,分别打孔,将左右支架固定,后需要用水平仪调整两个支架的水平度,确保它们绝对水平。
    Check the size of the portal and determine the specific installation position of the bracket based on it. Then, drill holes separately to fix the left and right brackets. Finally, we need to adjust the level of the two brackets with the level meter to ensure their absolute level.
    4、将门体安装到支架上
    4. Install the door body on the bracket
    首先,根据门洞位置确定中轴长度,接着,将门体抬上支架,并用螺丝初步固定,然后,检查门体与导轨和支架的衔接是否良好,如果没有问题,就可以将螺丝拧紧,有问题就进行调试,直到问题解决。
    Firstly, according to the position of the portal, the length of the mid-axis is determined. Then, the portal body is lifted onto the bracket and fixed preliminarily with the screw. Then, the connection between the portal body and the guide rail and the bracket is checked. If there are no problems, the screw can be tightened. If there are problems, the screw can be debugged until the problem is solved.
    5、弹簧调试
    5. Spring debugging
    将弹簧按顺时针方向扭转,如果能扭转一周,弹簧的暗转就刚好合适,弹簧调试好以后,就可以揭开门体包装,将其引入导轨。
    Turn the spring clockwise. If it can turn around for a week, the dark rotation of the spring is just right. After the spring is adjusted, the door package can be opened and introduced into the guide rail.
    6、卷门开关调试
    6. Debugging of Roller Door Switch
    卷门安装好以后,可以将卷门开关几次,检查它的运作是否正常,螺丝是否拧紧等问题,这时如果发现问题,就能及时解决,防止日后使用出现安全事故。
    After the rolling door is installed, the rolling door can be switched several times to check whether its operation is normal and whether the screw is tightened. If problems are found, they can be solved in time to prevent safety accidents in future use.
    感谢您的阅读与观看,本文的精彩内容来自:济南卷帘门,我们会有更多的精彩内容继续为您呈现,详情请点击:http://www.jnjqjc.com感谢大家的支持!
    Thank you for reading and watching. The wonderful content of this article comes from: Jinan Curtain Door, we will have more wonderful content to continue to show you. For more details, please click: http://www.jnjqjc.com. Thank you for your support!