• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    如何安装水晶卷帘门才经久耐用?
    来源:http://www.jnjqjc.com   时间:2019-4-29 17:43:27
    水晶卷帘门凭借本身透明、防尘、静音等众多优点在商业街区被普遍运用,成为传统卷帘门新的替代品,水晶卷帘门的透明性又可提供极佳的能见度,使工作环境愈加平安牢靠。水晶卷帘门成为银行,电信,地铁站,时装专卖店及别墅阳台等以追求平安,典雅,时髦气度场所的理想之选。下面济南卷帘门公司就给大家解说一下水晶卷帘门的装置步骤,希望对大家有所协助!
    Crystal curtain doors are widely used in commercial blocks because of their transparency, dust-proof, silence and many other advantages. They have become a new substitute for traditional curtain doors. The transparency of crystal curtain doors can provide excellent visibility, which makes the working environment more secure and reliable. Crystal curtain doors become ideal places for banks, telecommunications, subway stations, fashion stores and villas balconies in pursuit of peace, elegance and fashion. Next, Jinan Rolling Curtain Door Company will explain the installation steps of the crystal rolling curtain doors, hoping to help you all!
    1、首先看手动链条能否向下,在将电机固定在主板上。在把链条固定在轮盘和电机底座齿轮衔接(一定上紧)在将遥控接线盒与电机衔接,试下手柄能否颠倒,如颠倒遥控接纳盒侧方有黑色按键,向另一方拨动助即可。
    1. First of all, see if the manual chain can go down and fix the motor on the motherboard. When the chain is fixed on the wheel disc and the gear of the motor base (must be tightened) and the remote control junction box is connected with the motor, try whether the handle can be inverted, such as inverting the black button on the side of the remote control acceptance box, and dialing assistance to the other side.

    2、用尺子量主板和副板的外边看下尺寸能否正确,如正确把轴上在侧板上,留意要先把轴打一条程度线,再用10个钻头打孔50公分,1个一定要直,再用14的镙母焊在轴上,记住要与轴上的孔垂直在焊,一定要焊结实,再把帘子的片的中心与轴上的孔对齐用10个的钻头打孔一定要垂直(也能够用快丝固定)。

    济南水晶卷帘门

    2. Measure the outside of the main board and the auxiliary board with a ruler to see if the dimensions are correct. If the axle is on the side board correctly, pay attention to drawing a degree line first, then drilling 50 centimeters with 10 drills, one must be straight, and then welding on the axle with 14 dysprosium mother. Remember to weld vertically with the holes on the axle, must weld firmly, and then align the center of the first piece of the curtain with the holes on the axle with 10. The drill must be perpendicular to each other (and can be fixed with fast wires).
    3、在将卷帘门帘片穿好两侧用封头封好用拉铆钉拉住(记住开端封各一片封一个)。
    3、在将卷帘门帘片穿好两侧用封头封好用拉铆钉拉住(记住开端封各一片封一个)。
    4、封完后用绳翻过轴把帘子打个孔一头一个用绳拴住,别一端用人拽住,按下手柄的上升键,使轴运转将帘子带上去,镙丝杆把帘子和轴连在一同(程度要拧紧加垫)再把帘子升上去,一定要结实。
    4. After sealing, make a hole in the curtain by turning the rope over the axle, tie the curtain one end with a rope, pull the other end with a rope, press the lifting key of the handle, make the axle run and bring the curtain up. The threading rod connects the curtain and the axle together (to tighten the cushion) and then lifts the curtain up, so that the curtain must be strong.
    5、把轨道的一端开成人字口。
    5. Open one end of the track into a word.
    6、把卷帘门帘子调平,上下线定位,左边滑轮是上限位,右边是下限位,(依据现场需求自行调理)。
    6. Level the curtain of the rolling curtain door, position the upper and lower lines, the left pulley is the upper limit, and the right is the lower limit. (According to the needs of the site, adjust by oneself.)
    好了,以上就是本期的精彩内容了,不知道小伙伴们看完明白了没有!如果大家还有任何的疑问,可以随时咨询济南卷帘门公司的官网在线客服人员:http://www.jnjqjc.com!十分感谢大家的支持!
    Okay, that's the highlight of this issue. I don't know if my little friends understand it after reading it. If you have any questions, you can always consult Jinan Rolling Curtain Door Company's official website online customer service personnel: http://www.jnjqjc.com! Thank you very much for your support!