• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    玻璃门安全安装按照这10步走!
    来源:http://www.jnjqjc.com   时间:2019-5-15 17:57:59
    现在的玻璃门在我们生活中是非常常见的,而且现在玻璃门的种类也是非常多的,例如装饰玻璃门、安全玻璃门、节能玻璃门、涂层镀膜玻璃门、感应玻璃门等等。但是不管哪种玻璃门都是具有非常好的降低噪音性能、防风性能、防尘性能等等。所以它在很多行业被广泛使用,下面济南玻璃门生产安装厂家给大家总结一下玻璃门的安装方法,希望对大家有所帮助!
    Now glass doors are very common in our life, and now there are many kinds of glass doors, such as decorative glass doors, safety glass doors, energy-saving glass doors, coated glass doors, inductive glass doors and so on. But no matter what kind of glass doors are very good noise reduction performance, windproof performance, dust-proof performance and so on. So it is widely used in many industries, the following Jinan glass door manufacturers to summarize the installation methods of glass doors, hoping to help you!
    1、放线定位:由固定玻璃和活动玻璃门扇组合在的玻璃门,统一进行放线定位。
    1. Placing positioning: The glass door which is composed of fixed glass and movable glass doors is positioned in a unified way.
    2、安装框顶部限位槽:限位槽的宽应大于玻璃厚度2-4mm,槽深为10-20mm。安装时,先由所弹中凡线引出两条金属装饰板边线,然后按边线进行门框顶部限位槽的安装。
    2. Limiting groove at the top of installation frame: The width of the groove should be 2-4 mm larger than the glass thickness, and the groove depth should be 10-20 mm. When installing, two metal decoration board edges are drawn from the projected midline, and then the top limit slot of the door frame is installed according to the edges.
    3、安装金属饰面的木底托:先把方木固定在地面上,然后再用万能胶将金属饰面板粘在木上,方木可采用直接钉在预埋木砖上,或通过膨胀螺栓连接的方法固定。
    3. Installation of wooden underpinnings with metal veneers: Fix the square wood on the ground first, and then glue the metal veneer panel onto the wood with universal glue. The square wood can be fixed by nailing directly on the embedded wood bricks or by connecting with expansion bolts.
    4、安装竖向门框:接所弹中心线钉立门框方木,然后用胶合板确定门框柱的外形和位置,后外包金属装饰面。

    4. Installation of vertical door frames: Fix the projected central line to nail the door frame square wood, then use plywood to determine the shape and position of the door frame column, and finally wrap the metal decorative surface.

    济南玻璃门安装效果

    5、安装玻璃:用玻璃吸盘机把厚玻璃吸紧,然后手握吸盘把由2-3人将厚玻璃板抬起,移至安装位置。
    5. Installation glass: Use glass sucker to tighten the thick glass, and then hold the sucker to lift the thick glass plate by 2-3 people and move it to the installation position.
    6、固定玻璃:在底托方木上的内外钉两根小方木条把厚玻璃夹在中门,方木条距玻璃板面4mm左右,然后在方木条上涂刷万能胶,将饰面金属粘卡在方木条上。
    6. Fixed glass: Two small square wooden bars are nailed on the base square wood to clamp the thick glass in the middle door. The square wooden bars are about 4 mm away from the surface of the glass plate. Then the universal glue is applied on the square wooden bars, and the decorative metal is glued to the square wooden bars.
    7、注玻璃胶封口:在顶部限位槽和底部托槽口的两侧,以及厚玻璃与框柱的对缝处等各缝隙处,注入玻璃胶封口。
    7. Glass-injected sealant: The sealant is injected into both sides of the top limit groove and the bottom bracket mouth, as well as the seam between the thick glass and the frame column.
    8、玻璃之间对接:玻璃门固定部分因尺寸过大而需要拼接玻璃时,其对缝要有2-3mm的宽度,玻璃板边要进行倒角处理。
    8. Docking between glasses: When the fixed part of the glass door needs to be spliced because of its large size, the width of the seam should be 2-3 mm, and the edge of the glass plate should be chamfered.
    9、动玻璃门扇安装:门扇安装前,地面地弹簧与门框顶面的定位销应定位安装完毕,两者必须同轴线,安装时用吊垂线检查,确保地弹簧转轴与定位销的中心线在同一会直线上。
    9. Installation of movable glass doors: Before installation of doors, the positioning pins of ground spring and top of doorframe should be positioned and installed. Both must be coaxial line. When installation, the vertical line should be checked to ensure that the center line of the rotating shaft of ground spring and positioning pin is in the same straight line.
    10、安装玻璃门扇上下门夹:把上下金属门夹分别装在玻璃门扇上下两端,并测量门扇高度。
    10. Install the upper and lower door clamps of glass doors: Install the upper and lower metal door clamps at the upper and lower ends of glass doors respectively, and measure the height of the doors.
    感谢您的阅读与观看,本文的精彩内容来自:济南玻璃门生产安装厂家,我们会有更多的精彩内容继续为您呈现,详情请点击:http://www.jnjqjc.com
    Thank you for your reading and watching. The wonderful content of this article comes from: Jinan Glass Gate Manufacturer and Installation Factory. We will have more wonderful content to continue to show you. For more details, please click: http://www.jnjqjc.com.