• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    济南卷帘门在生产过程中注重质量!
    来源:http://www.jnjqjc.com   时间:2019-7-25 10:45:39
    大家都知道,济南卷帘门是一家十分注重质量的厂家,具体在生产过程中体现在哪几个方面呢?下面我们就一起来看看吧!
    As we all know, Jinan Rolling Curtain Door is a manufacturer that pays great attention to quality. What aspects are embodied in the production process? Now let's take a look together.
    一、对要素的描述
    I. Description of Elements
    针对产品实现的全过程,包括技术洽谈,技术确认,技术输出,采购验证,生产加工,过程检验,安装报验等过程,通过过程控制,以保证产品和服务质量。
    In view of the whole process of product realization, including technical negotiation, technical confirmation, technical output, procurement verification, production and processing, process inspection, installation and verification, process control is adopted to ensure the quality of products and services.
    二、检验和试验
    II. Inspection and testing
    为保证产品的质量,采取正确的检验方法,适当的检验工具,以及配备适合的检验人员,对原材料,工序,安装等过程进行检验,为产品合格提供证据。
    In order to ensure the quality of products, we should adopt correct inspection methods, appropriate inspection tools, and equipped with suitable inspectors to inspect the raw materials, processes, installation and other processes, and provide evidence for the qualifications of products.
    三、检验和试验
    III. Inspection and testing
    按照厂内要求,进行产品检验,按照甲方要求,进行产品安装后报验。通过检验,为工程提供合格的产品
    In accordance with the requirements of the factory, product inspection shall be carried out, and after installation, product inspection shall be carried out in accordance with Party A's requirements. Provide qualified products for the project through inspection
    四、检验和试验状态
    IV. Inspection and test status

    在产品加工,完成安装各个过程按照规定采用适当的标识,确保所有合格的产品方能进入下道工序。

    济南卷帘门

    In the process of product processing and installation, proper labeling should be adopted in accordance with the regulations to ensure that all qualified products can enter the next process.
    五、不合格品的控制
    V. Control of Non-conforming Products
    对于过程控制中出现的不合格品,及时采取状态标识进行隔离,并按照程序采用返工,返修,降级使用或报废等方法进行不合格的处置,对于处置后的不合格品重新进行检验和试验,合格后方可进入下道工序
    For non-conforming products in process control, state identification shall be adopted to isolate them in time, and unqualified disposal methods such as rework, repairing, degrading or scrapping shall be adopted according to the procedure. After disposal, non-conforming products shall be re-inspected and tested, and the next working procedure shall be entered only after they are qualified.
    六、纠正和预防腐剂措施
    VI. Correcting and Preventing Corruptants Measures
    对于重庆彩钢卷帘门出现的不合格,应及时采取纠正措施进行整改,同时根据情况进行分析,制定预防腐剂措施,防止不合格的再次出现。
    Corrective measures should be taken to rectify the unqualified rolled shutter doors in Chongqing. Corrosion preventive measures should be formulated to prevent the unqualified doors from reappearing according to the analysis of the situation.
    今天的精彩内容就暂且和大家介绍到这里了,如果大家有其他想要补充的地方,欢迎大家到济南卷帘门的官网给我们留言评论:http://www.jnjqjc.com,或者直接拨打我们的咨询热线,我们将给您一个满意的答复!
    Today's wonderful content will be introduced here for the time being. If you have other places to add, you are welcome to leave a message and comment on the official website of Jinan Rolling Curtain Gate: http://www.jnjqjc.com, or call our hotline directly. We will give you a satisfactory answer!