• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    肯德基门组装工艺越来越精湛
    来源:http://www.jnjqjc.com   时间:2014-4-23 11:39:42

      市面上出售的肯德基门的五金配件质量相差很大,正规品牌的产品会选用耐腐蚀性高、不易生锈的镀锌合页,而一些小厂家会搭配普通的铁质合页。在选购时,还应仔细辨认。
    Sale of KFC door hardware accessories on the market the difference in quality, regular brand products can choose high corrosion resistance, not easy rusty galvanized hinges, and a few small manufacturers will match the ordinary iron hinge. When the choose and buy, should also be careful to identify.
    肯德基门具有美观大方、经久耐用、颜色多样、使用寿命长,维修方便等特点。已广泛用于超市、商场、连锁酒店、快餐店等区域的保温,防沙、防尘、遮蔽隔离的应用。下面我么一起来看一下选购肯德基门时对于肯德基门窗有什么要求把。
    KFC door has beautiful and easy, durable, color variety, long service life, convenient maintenance, etc. Has been widely used in supermarkets, shopping malls, chain hotels, restaurants and other areas of insulation, sand, dust, cover the application of isolation. Below we look at the KFC door of choose and buy together for KFC doors and Windows are any requirements.
    随着国家对建筑节能的重视,节能的肯德基门也有利于实现建筑节能。响应国家政策,奉献国民奉献自己的力量。在门窗方面,从鉴别肯德基门好坏开始。
    As the country's emphasis on building energy efficiency, energy saving of the KFC door is also conducive to building energy efficiency. National response national policy, dedication dedication. In terms of doors and Windows, starting from the identification of KFC door is good or bad.
    一是观察型材外观情况。消费者要注意看门窗的框和扇的型材颜色是否一致,外观是否均匀,型腔分布是否合理。一般表面通常有光泽,很有韧性。
    One is the observed profile appearance. Consumers should pay attention to see if the frame of door window and door profile color is consistent, uniform appearance whether, cavity distribution is reasonable. General surface luster, often very resilient.
    二是看各种型材之间的配合间隙是否紧密,配合处切口是否平齐,型材搭接处的高低差等等。各种型材连接处间隙值越小,配合越紧密,组装工艺越精湛。
    2 it is to see whether the fit clearance between the various profiles is close together, cooperate with incision is flush, the discretion of the profile set it difference and so on. Various materials joint clearance value is smaller, the closer cooperation, the assembly process is more exquisite.
    三是看组装焊接处是否平齐,是否有裂缝,内外的角缝清理是否干净美观等。
    3 it is to see whether assembly welds flush, if there is a crack, whether Angle seam cleaning both inside and outside clean and beautiful, and so on.
    济南卷帘门:http://www.jnjqjc.com/
    Jinan shutter