• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    济南卷帘门的安装术语
    来源:http://www.jnjqjc.com   时间:2014-12-29 14:38:56
    高位提升式:指门扇通过导轨垂直向上运行一段后再分段转向运动的分节上翻式工业门的安装方式.
    High lift: refers to the doors through the guide vertical running after a period of segmental motion segmentation turn over type industrial door of installation.
    顶置安装方式:扭簧平衡系统位于完全开启的门扇顶部的垂直提升式工业门的安装方式.
    Overhead installation: vertical lift industrial door of torsion spring balance system is in the full open door is in the top.
    中置粱安装方式:扭簧平衡系统位于完全开启的门扇的中央部位的垂直提升式工业门的安装方式.
    Middle beam installation: vertical lift door industry is located in the central part of the torsion spring balance system fully open the doors of the.
    重锤(配重)平衡方式:采用配重方式来平衡门扇重量的垂直提升式工业门的安装方式.
    Weight (weight) balance: installation by way of the counterweight to balance the vertical lift industrial door leaf weight.
    推拉式:通过导轨和传动系统使门扇(单扇、双扇或多扇)向左右方向推拉的工业门的安装方式.
    Push pull type: through the guide and transmission system so that the door leaf (single, double or multi fan fan fan) to install mode about the direction of the push and pull of industrial doors.
    上承重式:指门扇重量由门扇顶部导轨来承受的推拉式工业门的安装方式.
    Bearing type: refers to the installation of the push-pull type industrial door door leaf weight to bear by the door leaf top guide rail.
    下承重式:指门扇重量由门扇下部的地轨来承受的推拉式工业门的安装方式.
    The lower bearing type: refers to the installation of the push-pull type industrial door door leaf weight to bear by the lower part of the door leaf of the rail.
    下承重电机随动式:指开门机安装在门扇上随门扇运动的下承重式工业门的安装方式.
    The motor bearing of passive: refers to the open the door machine is installed on the door leaf with the bearing type under the industrial door movement of the mounting.
    济南卷帘门:http://www.jnjqjc.com/