• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    卷帘门型材的上色过程
    来源:http://www.jnjqjc.com   时间:2015-1-21 14:59:46

    1、表面预处理:用化学或物理的方法对型材表面进行清洗,裸露出纯净的基体,以利于获得完整、致密的人工氧化膜。还可以通过机械手段获得镜面或无光(亚光)表面。
    1, surface pretreatment: cleaning on the profile surface by chemical or physical methods, expose the pure matrix, inorder to get the complete dense oxide film, artificial. You can also through mechanical means to obtain mirror orlight (Ya Guang) surface.
    2、阳极氧化:经表面预处理的卷帘门型材,在一定的工艺条件下,基体表面发生阳极氧化,生成一层致密、多孔、强吸附力的AL203膜层。
    2, anodic oxidation: the rolling shutter door profile surface pretreatment, under certain conditions, the anodicoxidation of substrate surface, generating a layer of dense, porous, strong adsorption capacity of AL203 film.
    3、卷帘门型材进行封孔:将阳极氧化后生成的多孔氧化膜的膜孔孔隙封闭,使氧化膜防污染、抗蚀和耐磨性能增强。氧化膜是无色透明的,利用封孔前氧化膜的强吸附性,在膜孔内吸附沉积一些金属盐,可使型材外表显现本色(银白色)以外的许多颜色,如:黑色、古铜色、金黄色及不锈钢色等。
    3, section of rolling shutter door seal hole: film hole porous oxide film anodized oxide film generated closed, sothat pollution prevention, corrosion resistance and abrasion resistance enhancement. The oxide film is colorless andtransparent, by making use of the strong adsorption of sealing of hole before the oxide film, adsorption anddeposition of some metal salts in film hole, can make the profile appearance show ecru (silver white) in manycolors, such as outside: black, bronze, golden yellow and the color of stainless steel etc/
    济南卷帘门:http://www.jnjqjc.com/