• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    济南卷帘门铆接技术
    来源:http://www.jnjqjc.com   时间:2015-2-2 10:59:48

    1、平页合页铆接:可在15t冲床内装置简单的模具上进行。加工时将型材大边向下,合页在上,铆钉原来的半圆头应在下方,铆压后镦粗的铆钉头则位于上方,装配时再将扇页片铆接在扇上。
    1, flat sheet hinge riveting: mold in 15t in the simple device of punch press. Will be processed profiles big sidedownward, the hinge is in, the original half round head rivet should be below, riveting pressure after upsetting therivet head is positioned above, the assembly again when the fan page piece is riveted on fans.
    2、榫头铆接:用于两根相互垂直的构件连接。加工制作时,应将一根构件的端部加工成具有一定形状的榫头,另一根构件在相应的连接位置上加工出榫孔,待榫头插入榫孔后,将露出榫孔外部的榫头部分铆紧在榫孔中,并应有部分材料形成帽头,均布于榫孔周围,以保证结合牢固。此种铆接方法工艺简单,操作方便,生产效率高。
    2, tenon joint: a member for two mutually perpendicular connection. When processing and manufacturing, should be theend of processing a component into a certain shape tenon, another root component in the corresponding connectionprocessing tenon hole to be inserted into the mortise, tenon, tenon hole will be exposed outside of the tenonmortise riveting in part, and cap formation should be part of the material, uniformly distributed in the tenon holesaround, in order to ensure the firm combination. The riveting method has the advantages of simple process,convenient operation, high production efficiency.
    3、双拼料铆接:用于肯德基门由两根型材组合而成的梃上,先将两根型利用铆钉铆合到一起,再将其作为中梃构件装配到门窗框上去。有些铆接不能用冷铆的方法,一般可在电热铆榫机上进行铆接。
    3, Shuangpin riveting for KFC door is composed of two sections: a combination of the stile, first two type usingrivet riveted together, and then as the muntin component to the door and window frame up. Some can not use coldriveting riveting method, the general can be riveted on the electric mortise and tenon machine.
    济南卷帘门http://www.jnjqjc.com/