• 济南慧杭门业有限责任公司
  • 联系人:张经理
  • 手机:15966334566
  • 地址:济南市工业南路106号
  • 网址:http://www.jnjqjc.com
新闻中心当前位置:首页-新闻中心
    讲解防火卷帘门的安装步骤
    来源:http://www.jnjqjc.com   时间:2015-7-7 9:45:40

      防火卷帘门的安装济南卷帘门
      The installation of fire shutter
      (1)防火窗安装前必需进行检查,如因运输贮存不慎导致窗框、窗扇翘曲、变形、玻璃破损,应修复后方可进行安装。
      (1) fire window required inspection before installation, such as window frame and window sash warp caused by careless transportation storage, deformation, broken glass, should repair the rear can for installation.
      (2)防火窗安装时,须用水平尺校平或用挂线法校正其前后左右的垂直度,做到横平、竖直、高低一样。
      (2) the fire window when installation, must use clean flat or correction by hanging line method before and after its verticality, horizontal, vertical, high and low.
      (3)窗框必需与建筑物成一整体,采用木件或铁件与墙连接。钢质窗框安装后窗框与墙体之间必需灌溉水泥砂浆,并养护24小时以上方可正常使用。
      (3) the window frame and building into a whole, use wooden or metal parts connected to the wall. Steel frame is installed between window frame and wall required irrigation cement mortar, and maintenance more than 24 hours before normal use.
      (4)五金配件安装孔的位置应正确,使五金配件能安装平整、牢固,达到使用要求。
      The location of the mounting holes (4) hardware fittings should correctly, make hardware accessories can install flat, solid, to meet the use requirements.
      (5)防火玻璃安装时,四边留缝一定平均,定位后将四边缝隙用防火棉填实填平,然后封好封边条。
      (5) when installation, fire glass edges must be average, seam position will square aperture with fire cotton filled fill and level up, and then sealed edge banding.
      (6)安装除上述各项要求外,应按《工程施工及验收规范》要求进行。
      (6) is installed in addition to the above requirements, should be in accordance with the requirements of the engineering construction and acceptance standard ".

    本文由济南卷帘门生产厂家发表提供,更多资讯请关注http://www.jnjqjc.com/